Soft99 Surface Smoother 077 cleansing clay for dark cars

Surface Smoother clay-based material that easily removes metal dust, insect remains, paint deposits, tar and other contaminants driven into the paintwork without scratching the car body. Perfectly removes stubborn dirt without damaging the painted surface. The use of clay is a mandatory step in the preliminary preparation of the car surface for body polishing.

Characteristics:

• Easily removes grains of sand, metal dust, insect remains, tar and other contaminants embedded in the paintwork without scratching the car body.
• Excellently removes stubborn stains and is safe for paintwork.
• The use of a clay-based cleaner is a necessary step before abrasive or protective polishing of the body.

Note: the type of cleaning clay for white paintwork contains a larger abrasive, for dark paint it contains a finer one

• Consumption of product: depends on the degree of contamination of the surface being treated. Usually a briquette is enough for several treatments until it is completely dirty. Between treatments, clay should be stored so that it does not dry out.

Type of surface to be treated: paint and varnish coating, glass.

Method of application:

• Clean the car body from dust and sand.
• Mash the briquette thoroughly in your hands until completely softened and give it an even shape again.
• Softening allows for better adhesion to the body.
• Wetting the surface of the body with water, run a briquette over it.
• Move the briquette smoothly over the surface, making sure to water it with water.
• If the surface of the briquette is dirty, roll it with the dirty surface inward and use the clean side.
• Watch out for contamination of the clay, do not rub the surface with the dirty side!

Precautions:

• Use only for its intended purpose.
• Do not rub with force to avoid scratches.
• Do not rub with the dirty side - watch out for contamination of the briquette.
• Do not use the product in hot weather or on a heated car body.
• Do not use the product in strong winds or in places where there is a lot of dust, as this may cause scratches.
• Do not use a briquette that has fallen to the ground.
• If the product has hardened due to low temperature, it should be heated in warm water and used after softening.
• When used on repainted cars and worn-out bodies, try the product on an inconspicuous area.
• After use, store in the plastic bag included in the kit and do not allow foreign particles to stick.
• Store away from places with direct sunlight and temperatures above 40ºC.
• Dispose of as non-burnable waste.
• Attention! Keep out of the reach of children.
• Protect from direct sunlight and freezing.
• Do not take orally!
• Persons with sensitive skin should wear protective gloves.
• If accidentally swallowed, do not induce vomiting and seek immediate medical attention.

Composition: abrasive clay.